Bearing Torque Tester

Bearing Torque Tester
Torque Detection Part

It detects the torque of the outer ring of the bearing when axial force is applied to the inner ring, which is rotated at ultra-high speed.
It can measure the bearing at wide speed range from 0.5 to 100, 000 r/min. Since the temperature can be adjusted within a range of -40 to 100°C, rotational torque can be measured under various conditions.
The measured values are displayed in real-time on the screen and can also be output as analog voltage signals.

Main features

  • Max. Pushing force: 40 Nm, Max. Torque: 10 mNm
  • Bearing size from inner diameter 2 mm to outer diameter 35 mm
  • The continuous control of rotation speed and load values is possible with sequence commands.

Main Specifications

Max. torque 10 mNm
Max. speed 0.5 - 100,000 r/min
Max pushing force 40 N
Test environment Room Temperature
With temperature adjustment option: -40 to 100℃
Output Analog output
(Torque / Rotation speed / Axial pusher force / Temperature)
DC: 4 Channel
Output impedance 600 Ω, Voltage output
External interface RS-232 compatible port
Serial Command Reception Supported
The setting status is displayed on the screen
Air supply Dry air: 0.3 - 0.7 Mpa
Air consumption: 100 L/min
Power Supply 100 VAC±10%, 50/60 Hz
Dimensions (W×H×D mm) 250 × 420 × 520
Weight 42 kg

Inquiry for this product

Click the “Contact us” button to make inquiries about products, services, device calibration, etc. Contact us Click here for details on how Sugawara handles personal information.