Stroboscope MS-U100

The stroboscope MS-U100 is a xenon-type UV stroboscope that illuminates objects with light including near-ultraviolet wavelengths.
The natural light, close to sunlight, is suitable for various inspections and observations. By passing the xenon flash light through an optional filter, you can select and illuminate specific ultraviolet wavelengths.
While LEDs are limited to a specific wavelength, this model can illuminate with broadband UV light.
It supports a wide range of applications, such as analysis, surface treatment, sterilization, and exposure.
・Xenon lamp type illuminating with broadband light
・Sharp flash with a duration of approx. 1.6 μsec
・Compact design integrating power supply and lamp unit for easy installation in limited spaces
・Enables flexible light intensity control (max. output is 4x the minimum) via external analog signal or internal potentiometer
・Select specific UV wavelengths by passing light through an optional filter
・Mercury-free


By passing xenon flash light including near-UV wavelengths through an optional filter, you can also illuminate target objects with specific UV wavelengths.

An extremely short flash duration minimizes material degradation and damage, ensuring high-quality results suited to your application.
| Model | MS-U100 |
|---|---|
| Maximum flash frequency | 10 W |
| Maximum output power | 100 Hz |
| Single pulse energy | 0.1 Joules/Flash |
| Flash duration (FWHM) | Approx. 1.6 μsec |
| Flash delay time | Approx. 5 μsec |
| Trigger signal | Current signal / Contact signal |
| Power supply | 24±1 VDC |
| Consumption current | Approx. 0.5A,Peak current: 2 A or less |
| Dimensions (W×H×D) | 70 × 70 × 160 mm (excluding protrusions) |
| Weight | 600 g or less |