Strobo Lightguide Source: 60 W / Short flash duration and high brightness

MS-G6010

Stroboscopes MS-G6010

　

Main Features

  • Xenon flash lamp provides a wide spectrum range from ultraviolet to infrared.
  • Three models with different maximum flash frequencies (100 Hz, 150 Hz, and 200 Hz) are available.
  • Short flash duration: 1.6 μsec or less (200 Hz model) - 2.2 μsec or less (100 Hz model)
  • Long life：1×108 flashes or more
  • No light beam adjustments required after lamp replacement
  • The type of external trigger signal can be selected by changing the switch.
  • Flashes synchronized with camera using external trigger

Applications

  • Automated optical inspection (AOI) requiring high speed flashing
  • Automated optical inspection (AOI) requiring high intensity flashing

Clear imaging of micro targets with short flash duration

Flash waveform of MS-G6010

The 200Hz model achieves a flash duration of less than 1.6 μsec, shorter than previous models. It can clearly capture even tiny parts moving at high speed.

Spectrum similar to natural light

Spectral characteristics of MS-G6010

The light emitted by the xenon flash tube is white light, very similar to natural light, and is suitable for use with video cameras. When specific colors or spectral characteristics are required, optical filters can be used to transmit only the desired wavelengths.

Xenon Flash lamp replacement

Replaceable from the Rear

Since the Xenon Flash lamp is attached and detached from the rear side, there is no need to remove the lightguide or cables during replacement.

Main Specifications

Model MS-G6010-100 MS-G6010-150 MS-G8010-200
Maximum flash frequency 100 Hz 150 Hz 200 Hz
Maximum output power 60 W
Single pulse energy 0.6 J/Flash 0.4 J/Flash 0.3 J/Flash
Flash duration (FWHM) 2.2 μsec or less 1.8 μsec or less 1.6 μsec or less
Flash delay time (time from signal input to flash (at half maximum intensity)) 6.0±4.0 μsec
Light output stability (※1) 3.0%cv or less 3.5%cv or less 4.0%cv or less
Flash lamp life 1×108 Flashes
Lightguide type
   M Type
   SK Type
   HO Type
   HA Type		 The diameter Φ (mm) and length L (mm) of the insert part is specified by model name.
Φ=15, L=37
Φ=20, L=30
Φ=15, L=31
Φ=15, L=20
Intensity control Knob / Analog signal / digital signal can be selected with the switch
Trigger signal Current signal / Open collector can be selected with the switch
Power supply DC24 V±1 V
Consumption current Approx. 4 A, peak current: less than 7 A
Dimensions (mm) 149(W)×172(H)×317(D) + Lightguide insert part 20 – 37 mm
Weight Approx. 4 kg

(※1) Measured at 60 W output power. (Light intensity standard deviation/light intensity average x 100)

External view

Inquiry for this product

Click the “Contact us” button to make inquiries about products, services, device calibration, etc. Contact us Click here for details on how Sugawara handles personal information.