Optical-fiber type strobe light source: 80 W High-intensity model

MS-G8010

High-intensity flash incorporating long life tube, with minimal flicker even at high flash frequency. For automated optical inspections (AOI) requiring high speed and high intensity.
Delivers high intensity 80 W light output and high speed flashing up to 200 Hz.

Main features

  • High intensity (80 W continuous)
  • Low flicker at high-frequency flashing
  • Long life: 1×108 flashes
  • No light beam adjustments required after lamp replacement
  • Wide spectral range from ultraviolet to infrared
  • Flashes synchronized with camera using external trigger
  • Intensity can be controlled externally (analog/digital)
  • Compact size

Applications

  • Automated optical inspection (AOI) requiring high speed flashing
  • Automated optical inspection (AOI) requiring high intensity flashing

Significantly reduced flicker at high frequency (200 Hz) flashing

Main optical specifications

Model MS-G8010
Output wavelength 240 to 1100+nm
Flashlamp life 1×108 Flashes
Flash duration 2 to 8 μsec
Optical filter Interchangeable

General specifications

Model MS-G8010
Maximum continuous output power 80 W
Maximum flashlamp output 1 J/F (max 80 Hz)
Maximum flash frequency (Input energy to flashlamp) 200 Hz (0.4 J/F)
Flash failure signal output Photocoupler
Power supply 24 V±1 VDC
Power consumption Max. 150 VA
Trigger signal Photocoupler or Open collector
Intensity control By adjuster on front panel or external signal (analog/digital)
Dimensions (W×H×D) 140×160×300 mm
Mass 5 kg

Inquiry for this product